Jewelry Packaging Size & Fit Selector

Custom Paper Jewelry Boxes – Jewelry Packaging Selector

Jewelry Packaging Size & Fit Selector

When you are choosing custom paper jewelry boxes for a whole collection rather than a single piece, the deciding variable is rarely the print — it is whether the jewelry actually fits. This selector maps the seven published MY-0006 footprints to the contents each one is built for, then shows how insert layout, usable depth and lid format change the size you should specify. If the format is already settled, the gold foil bow jewelry box page shows the finished lift-off build in detail, from the pressed foil bow to the fitted interior.

4×4 – 4×21 cm Seven published footprints
Lift-off lid No hinge, no fabric joint
Rigid paperboard Square-corner body
Moyi Premium Gold Foil Bow Jewelry Box Lift-off Design For Gifting And Storage

Start With What Goes Inside

The Master Fit Matrix

Seven footprints, one row each. Read across to see what a size is built for, the insert layout it usually carries, and the decision it settles — a ring box and a cuff box are not interchangeable, even at the same price point.

MY-0006 published footprints and the contents each size is built for
Footprint Contents it fits Typical fitted interior Lid format Buyer note
4 × 4 cm A single ring, or a pair of small studs Ring slot or stud card Lift-off The smallest counter footprint — one piece per box.
5 × 5 cm A ring with a small pendant, or one pair of earrings Ring slot with a card alongside Lift-off The default pick when the line is earring pairs.
5 × 8 cm Bracelets and slim bangles Bracelet pillow or bar slot Lift-off Slim rectangle; holds a bangle without side slack.
7 × 9 cm A pendant necklace, or a bracelet with matching earrings Necklace card with a slot beside it Lift-off Lets a two-piece set ship in one box.
9 × 9 cm A wide cuff, or a necklace with earrings Cuff pillow or necklace card Lift-off Square format gives the width a cuff actually needs.
12 × 16 cm A full set; doubles as a keepsake box Full fitted tray Lift-off The gifting and dressing-table storage size.
4 × 21 cm Long chains laid flat instead of coiled Flat cavity with a chain bar Lift-off Stops the coiling marks a folded chain picks up.

Footprints are the published MY-0006 sizes. Interior layout is built around the piece you are packing, so confirm the working depth together with your insert choice before artwork is released.

Moyi Premium Gold Foil Bow Jewelry Box Lift-off Design For Gifting And Storage

MY-0006 Specification Sheet

Read this sheet as a constraint list rather than a brochure. The seven footprints set what you can order off the shelf; colour, material, logo and style are where the customization conversation sits.

Core build details for the lift-off jewelry box
Model No.MY-0006
Product typePaper jewelry packaging box
Intended contentsRings, bracelets, necklaces and earrings
Available box sizes4×4, 5×5, 5×8, 7×9, 9×9, 12×16, 4×21 cm
Body constructionRigid paperboard with square corners
Lid typeLift-off, no hinge
DecorationGold foil bow, pressed from metallic foil
Customization scopeSize, colour, material, logo and style (OEM/ODM)

Interior Engineering: Where the Depth Goes

Footprint gets the attention, but depth is what causes reorders. The rigid paperboard body gives a fixed internal cavity, and every insert you add inside it takes headroom away from the piece.

Working rule

Internal depth ≥ piece height + insert thickness + 3 mm clearance.

  • Ring slot

    The stone and shank set the height. A slot cut to the band holds the ring upright instead of letting it roll into a corner.

  • Earring card

    Card thickness plus post depth, shared between two earrings. The card, not the earring, is usually what pushes the box up a size.

  • Necklace card

    The pendant hangs free, so depth follows the pendant rather than the chain — a flat pendant in a deep box simply moves.

  • Cuff pillow

    The tallest insert of the four. A cuff needs width and height cleared at the same time, which is why 9×9 cm exists.

Fitted interior of the Moyi paper jewelry box built around the piece it carries

Format Families and When Each Wins

Size answers "does it fit". Format answers "how does it open on the counter, and what does it cost to assemble". Decide the format first — it changes the footprint efficiency you can work with.

Moyi gold foil bow jewelry box shown closed with the lift-off lid in place

Two-piece lid and base

A base with a lid that registers over the outside rather than lifting away inside it. Commonly specified when you want the lid to land aligned every time without a hinge line.

Wins on
Alignment on unboxing and a clean printed lid panel
Costs
Fit tolerance between lid and base has to be right

Drawer / sliding tray

A sleeve with a tray that slides out toward the buyer. Usually chosen for shelf presentation, where the box stays put and the product travels to the customer's hand.

Wins on
Shelf presence and a reveal that happens in stages
Costs
More parts and more assembly steps than a lift-off

Magnetic flap

A hinged flap held closed by magnets, opening like a book. Chosen when the unboxing itself is the moment you are selling, rather than the piece alone.

Wins on
A wide, staged reveal and a large printable inner panel
Costs
Hinge line, magnets and extra hand assembly

Match the Scenario to a Specification

Four places this box ends up. Each one pushes the specification in a different direction, and the product fact behind it tells you which way.

01

Counter presentation

The lift-off lid has no hinge to loosen and no fabric joint to crease, so the opening stays clean through hundreds of counter presentations.

Buyer decision: lock the format first, then take the smallest footprint that still clears the piece.

02

Mail order

Each box is built around the piece it carries so the jewelry stays in place rather than sliding when a closed box is stacked or mailed, and the box ships in an outer mailer as-is.

Buyer decision: keep clearance to roughly 3 mm rather than 10 — slack in transit becomes abrasion.

03

Gifting handovers

The gold foil bow is pressed from metallic foil rather than tied from ribbon, so it keeps a crisp shape and arrives sitting the same way every time on a reorder.

Buyer decision: 12×16 cm when the gift is a set; stay with a single-piece footprint for one hero item.

04

Keepsake and storage

The rigid paperboard body with square corners holds its shape, and 12×16 cm doubles as a keepsake box on a dressing table.

Buyer decision: step up one size when the box is meant to stay in the customer's home rather than leave in a bag.

Six Fit Mistakes Behind a Reorder

These are the specification slips that surface late — usually after the print run, when the cavity no longer meets the piece.

  • 1

    Sizing by outer footprint. The internal cavity is the only dimension the piece ever meets.

  • 2

    Coiling a long chain into a short box. The 4×21 cm format lays it flat and avoids the marks.

  • 3

    One size for a whole collection. A ring and a wide cuff do not share a cavity, whatever the branding says.

  • 4

    Measuring the piece without its clasp or extension. A closed clasp adds length you cannot compress.

  • 5

    Over-deep boxes for flat pendants. Extra depth turns into movement, and movement turns into scratches.

  • 6

    Approving artwork before the size is frozen. A footprint change resets every print and foil panel.

Send the Piece, Get the Footprint

A fit recommendation starts with three details, not a catalogue number. Send them once and the size, insert layout and finish can be quoted together.

  1. Piece dimensions

    Length, width and height including clasp, chain and any extension.

  2. What the box must survive

    Counter handling, a mailer, a gift handover, or a dressing table for years.

  3. Finish direction

    Colour, material, logo and style are all open under OEM/ODM customization.

Stock items ship in about 7 days; customized production runs 15–30 days. Air, rail DDP, sea DDP and forwarder shipping are all available. Reach the team at wendy@moyi.com or +86 15057819220.

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

How Do Wholesale Buyers Assess a Paper Jewelry Box Manufacturer?

Wholesale buyers assess a paper jewelry box manufacturer by factory scale, daily output, replenishment speed, custom lead times, and export delivery before they request a quote.

Read article

Rigid Paper Boxes That Protect Jewelry During Parcel Shipping

A rigid paper box with a fitted interior helps reduce jewelry movement and edge crushing in parcel shipping, but it works as mechanical help rather than a damage guarantee.

Read article

Paper Jewelry Box Manufacturing for Rigid Gift Box Assembly

Rigid jewelry boxes look simple, but their quality depends on how separate paperboard, lid, interior, and decorative parts come together before production scales up.

Read article

Frequently Asked Questions

Which size should i pick for a ring or a pair of studs?

the 4×4 cm box takes a single ring or a pair of small studs. if a ring has to travel with a small pendant, or you want one pair of earrings on a card, move up to 5×5 cm.

What is the longest size available for chains?

the 4×21 cm box is the long format, designed so chains can be laid flat instead of coiled. that prevents the fold marks a coiled chain picks up in transit.

Is the gold foil bow a real ribbon?

no. it is pressed from metallic foil rather than tied from ribbon, so it keeps a crisp shape, photographs cleanly and never needs re-tying — reorders arrive sitting the same way every time.

Can size, colour, material and logo be customized?

yes. size, colour, material, logo and style are all open to oem/odm customization, so a footprint can be adjusted around an existing piece rather than the other way round.

What are the lead times and shipping methods?

stock items ship in about 7 days; customized products run roughly 15–30 days in production. shipping runs through fedex, dhl, ups, tnt, ems, dpd and aramex, plus rail ddp and sea ddp to warehouse, delivery to your forwarder in china, and full container loading.

Does the lid stay put when the box is handled?

the lid lifts straight up and sits back down as a cover, with no hinge to loosen and no fabric joint to crease. the fitted interior is built around the piece, so the jewelry stays in place rather than sliding when a closed box is stacked or mailed.

Leave a message
Name *
Email *
Message *
Verification Code *
Click to verify